Please see the DLG test report

The Advantages:

• High Horse power capacity to cope with all conditions and tractor sizes from 90 to 350 hp
• Universal Cultivator from  3.0 to 5.0 m, working 5 to 30cm deep
• 3 bar frame for optimum mixing and blockage free operation
• Unique leg design vibrating for intensive effect in the soil but low fuel consumption
• Wide choice of shares, rear rollers and levelling equipment
• Intensive mixing of the residues
• Seedbed finish possible
• The CLC pro Classic is 50cm shorten than the CLC pro, shifting the centre of gravity closer to the tractor

CLC pro Classic – Strong Frame

• The frame design and heavy-duty central beam offers in-field durability even under extreme working conditions.
• The machine offers high underbeam clearance with 870mm to cope with incorporation of high volumes of crop residue.
• The frames can absorb e.g. 240 hp with 3.00m and up to 350hp for the folding implements with 5.0m.
• The material used can bear significant loads while staying reliable and light.
• The weight carried by the tractor is thus reduced and helps saving fuel.

CLC pro Classic – Tines and Shares

• The unique and robust design of the tines incorporates a specially heat treated hollow “C” profile.
• The heat treatment is of the same standards as the beams on the Kverneland ploughs.
• The tine leg can withstand sideway movements of up to 14cm. This means lower stress to the tine holder and frame structure.
• The CLC tines are suitable to work at 30 cm depth to fight plough pans and to encourage natural drainage, even in stony soils.
• The removal of soil compaction allows intensive rooting in the lower soil layers. The plants therefore gain access to nutrients and water reserves at these deeper soil levels.
• For operation in rather abrasive soil, Kverneland offers the option of carbide faced shares and wing shares.
• The carbide faced parts last 5 to 12 times longer than the standard ones
• The wing share is the right choice for shallow stubble cultivation.

CLC pro Classic – Leaf Spring/Vibromat

• For lighter conditions Kverneland offer the CLC tine with shearbolt overload protection.
• This version of the CLC tine offers the same high quality as that of the „Auto-reset“ tine, and is releasing from 2 tons.
• The Kverneland CLC tine equipped with the “Auto-reset“ leaf spring safety system is the perfect choice for hard and stony conditions.
• 2 types of leaf springs are available on CLC pro Classic: 450 kg or 640 kg release force depending on soil conditions
• The well renowned Kverneland leaf spring protects the tines against overload. The tine pressure decreases with the release height to protect the frame against stress.
• All pivot points of the CLC tines are manufactured with wear resistant bushes and bolts of the renowned Kverneland quality.
• Therefore the CLC tine system is maintenance-free

CLC pro Classic – Rear Accessories

There is a full range of rear rollers available:

Levelling tines

• Good levelling capacity
• Good following of the ground contour
• Adjustable by turnbuckle

Cage roller ø 550mm

• 10 bars for a good loading capacity and operation in wet conditions
• Effective crumbling action

Double cage roller ø 400mm (tube/flat) – 160 kg/m

• Good crumbling
• Precise depth control

Actipack ø 560mm – 220 kg/m

• The Kverneland Actipack roller displays its superb working qualities especially on medium to heavy soils and also in wet, stony and sticky conditions thanks to the independent skids and knives
• The cutting discs break the larger clods whilst the adjustable knives cut the remaining clods resulting in optimal clod breakdown and fine seedbed preparation

Actiring ø 540mm – 160 kg/m:

• The Actiring roller is a lighter variant of the Actipack, using the same frame structure and knife system
• The discs have been replaced by a “V” profile ring, this is saving 60kg/m, which is of critical importance for reducing lifting requirements for mounted equipment
• Actiring is not recommedned in stony conditions

Actiflex ø 580mm – 160 kg/m

• The Actiflex roller has been made to create an intensive mixing with all types of conditions, even stony ones
• The rings are made with spring steel to have a high resistance against stress at high speed
• Actiflex rings are separated by skids to prevent any accumulation inside the roller
• This roller is the ideal tool to create a nice seedbed and enhance the weeds’ regrowth after harvesting