The CLC range can be equipped with two types of tines and a wide selection of shares. According to the operation requested and the type of soil, the large choice of following implements allows to carry out all sorts of cultivation: from stubble cultivation at 5cm to deep loosening at 30cm working depth.

The great versatility of the CLC pro makes it the ideal implement to meet all your requirements.

The Advantages:

• High Horse power capacity to cope with all conditions and tractor sizes from 90 to 350 hp
• Universal Cultivator from  3.0 to 5.0m, working 5 to 30cm deep
• 3 bar frame for optimum mixing and blockage free operation
• Unique leg design vibrating for intensive effect in the soil but low fuel consumption
• Wide choice of shares, rear rollers and levelling equipment
• Intensive mixing of the residues
• Seedbed finish possible

CLC pro – Strong Frame

• The frame design and heavy-duty central beam offers in-field durability even under extreme working conditions.
• The machine offers high underbeam clearance with 870mm to cope with incorporation of high volumes of crop residue.
• The frames can absorb e.g. 240 hp with 3.00m and up to 350hp for the folding implements with 5.0m.
• The material used can bear significant loads while staying reliable and light.
• The weight carried by the tractor is thus reduced and helps saving fuel.

CLC pro – Tines and Shares

• The unique and robust design of the tines incorporates a specially heat treated hollow “C” profile.
• The heat treatment is of the same standards as the beams on the Kverneland ploughs.
• The tine leg can withstand sideway movements of up to 14cm. This means lower stress to the tine holder and frame structure.
• The CLC tines are suitable to work at 30 cm depth to fight plough pans and to encourage natural drainage, even in stony soils.
• The removal of soil compaction allows intensive rooting in the lower soil layers. The plants therefore gain access to nutrients and water reserves at these deeper soil levels.
• For operation in rather abrasive soil, Kverneland offers the option of carbide faced shares and wing shares.
• The carbide faced parts last 5 to 12 times longer than the standard ones
• The wing share is the right choice for shallow stubble cultivation.

Leaf Spring/Vibromat

• For lighter conditions Kverneland offer the CLC tine with shearbolt overload protection.
• This version of the CLC tine offers the same high quality as that of the „Auto-reset“ tine, and is releasing from 2 tons.
• The Kverneland CLC tine equipped with the “Auto-reset“ leaf spring safety system is the perfect choice for hard and stony conditions.
• The well renowned Kverneland leaf spring protects the tines against overload. The tine starts to release with loads over 640 kg. The release force decreases with the release height to protect the frame against high stress.
• All pivot points of the CLC tines are manufactured with wear resistant bushes and bolts of the renowned Kverneland quality.
• Therefore the CLC tine system is maintenance-free.

Rear Accessories CLC pro

The CLC pro is the model which can be equipped with the full range of following implements.

Levelling discs:

• Rubber spring loaded, to follow the ground and protect against stones
• Border discs as standard adjustable to the soil flow

Combi disc harrow:

• Combination of a single disc gang with all roller type
• Intensive mixing at shallow depth

Double disc gang ø 510 mm:

• Does a good mixing and incorporation
• Leaves a rough surface with aggregates ready for wintering, interesting at the end of autumn season for preparing spring fields and crops

Cage roller ø 550mm – 90 kg/m

• 10 bars for a good loading  capacity and operation in wet conditions
• Effective crumbling action

Double cage roller ø 400mm (tube/flat) – 160 kg/m

• Good crumbling
• Precised depth control

Actipack ø 560mm – 220 kg/m

• The Kverneland Actipack roller displays its superb working qualities especially on medium to heavy soils, also in wet, stony and sticky conditions thanks to the independent skids and knives
• The cutting discs break the larger clods whilst the adjustable knives cut the remaining clods resulting in optimal clod breadown and fine seedbed preparation

Actiring ø 540mm – 160 kg/m

• The Actiring roller is a lighter variant of the Actipack, using the same frame structure and knife system
• The discs have been replaced by a “V” profile ring, this is saving 60kg/m, which is of critical importance for reducing lifting requirements for mounted equipment
• Actiring is not recommended in stony conditions

Actiflex roller ø580mm – 160 kg/m

• The Actiflex roller has been made to create an intensive mixing under all conditions, even stony ones
• The rings are made with spring steel to have a high resistance against stress at high speed
• Actiflex rings are separated by skids to prevent any accumulation inside the roller
• This roller is the ideal tool to create a nice seedbed and enhance the weeds regrowth after harvesting