Spreading the Easy Way!

The Exacta CL EW is the ideal weighing spreader for the smaller grower! This ISOBUS 11783 compatible weighing spreader is equipped with an unique reference sensor. The EasySet dashboard on each spreading disc ensures simple and quick setting or adjustment. The basic hopper capacity is 1.100 litres, but this volume can be increased with maximal 2 easy to assemble alumunium hopper extensions up to 2000 litre hopper capacity. Working widths from 10 up to 24m are possible. An optional kit of vanes is available for 27/28 spreading. The Exacta CL EW can be operated with the IsoMatch Tellus, IsoMatch Tellus GO terminal or any ISOBUS compatible tractor terminal. Highest accuracy in all conditions: even spreading quality guaranteed! Save costs and increase quality: spreading the Easy Way!

The Advantages:

• CentreFlow spreading system
• Weighing system with unique reference sensor
• EasySet for quick and easy adjustment
• Border spreading is easy!
• ISOBUS 11783 compatible for easy plug and play
• Possible in combination with IsoMatch GEOcontrol

CentreFlow Spreading System

• No impact, no fragmentation, no dust: Central release point, smooth acceleration and centrifugal force accelerates fertiliser up to disc speed before it reaches the vane.

• Accurate spreading pattern: A double overlap spreading pattern gives unrivalled accuracy. The 8 vanes per discs are ensuring a continous flow of fertiliser to the field. This is important for high capacity spreading and forward speed.

• Minimal wind influence, maximum tolerance: Flat discs and a horizontal flow of fertiliser give a symmetrical spreading pattern.

• Consistent spreading pattern: Eight vanes per disc, eight sectors per revolution give an equal distribution. Double overlap spreading pattern.

• Guaranteed accuracy on slopes: guaranteed accuracy on slopes. The fertiliser always contacts the vanes at the same point, also on slopes and travels the complete length of the vane.

Weighing System

• Continuous dynamic “online – calibration” with high frequency communication signal.

• Kvernelands unique reference sensor technology: all negative influences are automatically corrected and eliminated, ensuring utmost spreading accuracy even on hill sides. The Kverneland reference sensor gives you absolute accuracy, because every kilo counts!

• Load cells in combination with the unique reference sensor:
  – Auto calibrating and continuous weighing system
  – Automatic correction on slopes
  – Automatic correction of shocks, even on rough terrain
  – Automatic speed related dosing system
  – No calibration test needed

• Highest accuracy in all conditions: even spreading quality guaranteed! Save costs and increase quality!

EasySet: Easy Setting and Adjustment

• The compact EasySet ‘dashboard’ gives you considerably simplified accurate setting and adjustment of applicaton rates. Two hydraulically operated metering plates, each with three discharge openings ensure an equal fertiliser flow from the hopper to the spreading discs.
• The development department of Kvernelands spreader R&D team has its own spreader competence centre in order to allow continuous testing throughout the year. All test are carried out according to the strictest international standards and quality requirements.
• The key to accurate spreading is matching fertiliser quality and litre weight with the spreading charts as close as possible. The CentreFlow 6 step checklist helps you to ensure consistent accuracy in all field conditions
  Select fertiliser type
  2. Determine granule size and distribution
  3. Determine litre weight
  4. Select spreading table
  5. Select field settings
  6. Adjust EasySet system

Border Spreading

• Kverneland offers the ExactLine system or manual/hydraulic border spreading plate for border spreading. The ExactLine can be accurately set for all types of fertiliser and for all working widths. Operation is easy, no need to leave the tractor seat. For the Exacta CL is also a tramline cylinder optional available.

• With one-side boundary spreading the tractor is driven approximately 2 metres from the field border.

• With boundary track spreading the tractor is driving in the first tramline and is spreading to the border. The distance to the border is the half of the working width.

• The Border Spreading Indicator (BSI), indicates which border spreading device is active.

AutosetApp

With the AutosetApp you have always the most up to date settings for your weighing spreader available. The AutosetApp is an App (software application) available on the IsoMatch Tellus terminal. The AutosetApp is standard integrated into the IsoMatch Tellus GEOcontrol software. This App connects the IsoMatch Tellus terminal directly with the Exacta CL and TL GEOspread weighing spreader and will automatically adjust the spreader according to the settings entered into the App. The AutosetApp will also work in combination with the CL-EW and TL, with the exception being for those spreaders the discharge point (letter setting) still needs to be adjusted manually on the spreader itself.