Kverneland Taarup 2532 MH – 2540 MH 2018-05-08T15:07:53+00:00

Kverneland Taarup 2532 MH – 2540 MH

Centre Mounted Disc Mowers

A centre mounted mower in working widths of 3.2 and 4.0m, all fitted with the fully welded slim cutterbar for improved cutting performance. The Kverneland Taarup 2540 MH is a true high performance mower with its 4.0m working width and 10 contra-rotating round discs. It combines the best of centre suspension of the Taarup 2500 MH series and the new HydroFloat – a hydraulic suspension to ensure a more even flotation of the 4.0m wide mowing unit.

The Advantages:

  • Hydraulic suspension
  • Direct drive cutterbar
  • Centre suspended
  • BreakBack
  • Headland lift

Technical Specifications

Working Width No. of Discs Weight Power Requirements
2532 MH 3.18m 8 794 kg 40/55 kW/hp
2540 MH 3.92m 10 970 kg 51/70 kW/hp*

* Please note that there is a minimum weight requirement of tractor.

Cutterbar with Round Discs

  • Kverneland Taarup uses round discs. Round discs are less susceptible to stone impact, and reduce shock loads in the transmission.
  • Stones are expelled immediately, before they have any chance of becoming jammed. The benefits are lower repair and maintenance costs – at the same time as a clean and aggressive cut.
  • The cutterbar has a high oil capacity, ensuring a very low working temperature. This ensures an efficient oil cooling and lubrication of the entire cutterbar.
  • The long curved gear wheels running in oil provides a very quiet and reliable power transmission.
  • The fully welded cutterbar gives a very stiff and strong design for high durability.
  • With the ProFit quick knife change system, maintenance of the cutting ability is easy. The knives are changed by one simple operation using the special lever.

Centre Suspension

  • The centre pivot suspension provides an even weight distribution of the 2500 H, 2836 M, 3224 MT, 3228 MT and  3132 MT and a uniform ground pressure over the complete working width, ensuring good ground contour following.
  • The mowing units are suspended in the centre of gravity. This design provides a constant, faster and more precise adaptation to ground contours.
  • The benefit is less skid wear, optimum protection of the stubble and less fuel consupmtion.

Direct Drive

  • The 2500 H disc cutterbar features a direct drive from the gearbox to the first disc that efficiently reduces power wastage and takes full advantage of the whole working width of the cutterbar.


  • To offer maximum protection of the cutterbar, these machines are fitted with the well-known Kverneland Taarup BreakBack solution.
  • When encountering an obstacle, the BreakBack will swing the machine backwards and over the obstacle, returning it to the original working position once the obstacle has been passed

HydroFloat Hydraulic Suspension

  • The 2500 H and 3132 MT are designed with a hydraulic suspension system, allowing easy setting of ground pressure, to adapt to varying field conditions. This provides the best conditions, for an even cutting height and maximum protection of the stubble. The result is better forage quality, less wear on the mower and reduced fuel consumption.
  • The ground pressure can be continuously and quickly adjusted from the tractor seat, even while operating. All you need to do, is to activate the hydraulic outlet.

Easy Lift on Headlands

  • On headlands the mower is lifted without activating the three-point linkage of the tractor which needs no adjustment in the field. A clever and simple solution ensuring good clearance and eliminating swath damage.